施工围栏的重复利用的方法

The method of reusing construction fences

施工围挡重复利用，施工围挡韧性更强，施工围挡拆卸方便，施工围挡施工更加整洁。现在社会都提倡低碳生活，人人都应参与。以前不管建筑工地建设、道路建设等四周都会使用水泥围墙来进行围堵，来维护环境，那样成本很高，而且一旦建设完成就必须拆掉，既浪费材料成本，又对环境造成了污染。

The construction fence is reused, with stronger resilience, easier dismantling, and cleaner construction. Nowadays, society advocates low-carbon living, and everyone should participate. Previously, cement fences were used to enclose construction sites, roads, and other areas to maintain the environment, which was costly and had to be dismantled once completed. This not only wasted material costs but also caused pollution to the environment.

施工围挡大部分的代替了水泥围墙。可持续使用10年以上，即使是反复装卸、搬运、拆卸亦能周转5次以上，只要使用一次即可收回砖混围墙80%的成本，使用5次以上，每次只有砖混围墙25%的成本。

Most of the construction fences have replaced cement walls. Sustainable use for more than 10 years, even with repeated loading, unloading, handling, and dismantling, it can be turned over more than 5 times. With just one use, 80% of the cost of the brick concrete wall can be recovered. With more than 5 uses, only 25% of the cost of the brick concrete wall can be recovered each time.

施工围挡采用彩钢夹心板做墙面，背后用金属方管或角钢做围挡骨架，用金属方管制成定型三角架支撑，再用中的镀施工围挡重复利用锌角铁或者膨胀螺丝固定三角架。

The construction fence adopts color steel sandwich panels as the wall surface, with metal square pipes or angle steel as the fence skeleton at the back. The metal square pipes are used to make a shaped tripod support, and then the galvanized construction fence is reused to fix the tripod with zinc angle iron or expansion screws.

施工围挡稳定性好，抗风雨、防倾倒能力强，美观整齐、不变形，便于安装、拆除、运输，能重复使用，且成本低。

The construction fence has good stability, strong resistance to wind and rain, and anti tipping ability. It is beautiful, neat, and not deformed, easy to install, remove, and transport, can be reused, and has low cost.

施工围挡尤其适用于修路、建桥等线型工地以及基础较深的土建工地。对于行人车辆、人员起到保护作用，对于防尘降噪、美化城市彩钢围墙发挥积极作用。

Construction fences are particularly suitable for linear construction sites such as road and bridge construction, as well as civil construction sites with deep foundations. It plays a protective role for pedestrians, vehicles, and personnel, and plays a positive role in dust prevention, noise reduction, and beautification of urban color steel walls.

施工围挡临时围墙特点;彩钢板临时围墙采用钢结构柱，双面夹芯彩钢板或单层压型彩钢板通过螺栓连接而成。用彩钢板固定于栅栏之上，用于临时工地的隔离，方便、可多次使用。

Characteristics of temporary construction fence; The temporary enclosure of color steel plate adopts steel structure columns, and is connected by bolts with double-sided sandwich color steel plate or single-layer pressed color steel plate. Fixed on the fence with colored steel plates for temporary site isolation, convenient and reusable.

围栏精益求精的制作工艺

Striving for excellence in production techniques

锻造工艺：锻造是铁艺护栏制作的核心工艺之一，通过加热钢材，使其达到一定的可塑性，再利用锤子、砧子等工具进行反复捶打，塑造出各种形状。在锻造过程中，工匠们凭借丰富的经验和精湛的技艺，精准控制力度和角度，使每一个部件都呈现出独特的质感和造型。

Forging process: Forging is one of the core processes in the production of wrought iron guardrails. It involves heating steel to achieve a certain degree of plasticity, and then repeatedly pounding it with tools such as hammers and cutting to shape various shapes. During the forging process, craftsmen rely on their rich experience and exquisite skills to precisely control the force and angle, resulting in each component presenting a unique texture and shape.

焊接工艺：焊接质量直接影响铁艺护栏的整体强度和稳定性。在济南铁艺护栏制作中，常采用氩弧焊工艺，这种焊接方式能够在焊接过程中提供惰性气体保护，有效防止金属氧化，确保焊缝光滑、牢固。焊接时，要求焊缝均匀、饱满，无气孔、裂纹等缺陷，焊接点的强度需达到母材的 80% 以上。

Welding process: The welding quality directly affects the overall strength and stability of the wrought iron guardrail. In the production of iron railings in Jinan, argon arc welding technology is often used. This welding method can provide inert gas protection during the welding process, effectively prevent metal oxidation, and ensure smooth and firm welds. When welding, it is required that the weld seam is uniform, full, and free of defects such as pores and cracks. The strength of the welding point should reach more than 80% of the base metal.

表面处理工艺：除了前面提到的热镀锌和喷塑处理，打磨和抛光也是重要的表面处理环节。打磨能够去除钢材表面的毛刺、铁锈和焊接痕迹，使表面更加平整；抛光则进一步提升表面的光洁度，增强护栏的美观度。

Surface treatment process: In addition to hot-dip galvanizing and spray coating mentioned earlier, grinding and polishing are also important surface treatment steps. Grinding can remove burrs, rust, and welding marks on the surface of steel, making the surface smoother; Polishing further improves the surface smoothness and enhances the aesthetic appeal of the guardrail.

本文由济南铁艺护栏友情奉献.更多有关的知识请点击:http://www.jnghbxg.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message