随着社会的不断发展，人们的欣赏水平越来越高，济南铁艺大门的艺术水平逐渐上升，并且现在的功能逐渐多元化。下面小编来给您讲解下不同类型的别墅铁艺大门安装方法。

With the continuous development of society, people's appreciation level is getting higher and higher. The art level of Jinan Iron Gate is gradually rising, and its functions are gradually diversified. The following editor will explain to you the installation methods of different types of iron gates in villas.

推拉门:在安装这款铁艺大门的时候，一定要先将其边框和导轨用螺丝固定住,并水平放进预留好的门洞中,然后再安装门扇。一旦其门锁安装不对称或是锁不上的时候，要及时利用外框的锁扣进行上下调整。此外，如果两门扇出现重叠且有偏斜时，也可通过上调滑轮加以调整。可以说,这款别墅铁艺大门安装起来是相对比较便利的。

Sliding door: When installing this iron gate, be sure to fix its frame and guide rail with screws, and put them horizontally into the reserved door opening, and then install the door leaf. Once the door lock is installed asymmetrically or cannot be locked, the lock catch of the outer frame shall be used to adjust up and down in time. In addition, if the two door leaves overlap and are skewed, they can also be adjusted by raising the pulley. It can be said that the iron gate of this villa is relatively convenient to install.

平开门和小折叠门：

Swing door and small folding door:

通常情况下,开大小孔就可以进行安装了,直接将门扇放入门洞并用螺丝固定在铁艺大门门框上即可。装接片的时候,应该先将拉片拉横后放入门洞内再用螺丝固定拉片。配分体线条的时候，应先把分体线条固定在框上再将铁艺大门门扇放入门洞进行固定。全部安装完成后,做好验收工作,仔细检查一下门扇开关是否灵活,各边的缝隙是否达标,锁位是否存在错位等情况。

Generally, the installation can be carried out by opening large and small holes. Simply put the door leaf into the entrance hole and fix it on the iron gate frame with screws. When installing the connector, pull the tab horizontally and then put it into the door hole, and then fix the tab with screws. When distributing split lines, first fix the split lines on the frame and then put the iron gate leaf into the door opening for fixing. After all the installation is completed, do a good job of acceptance, carefully check whether the door leaf switch is flexible, whether the gap on each side is up to standard, and whether there is dislocation in the locking position.

大折叠门：

Large folding door:

安装这款别墅铁艺大门的时候，要先将吊轮或四扇以上用的固定器放入导轨里。将边框和导轨用螺丝固定牢固,随后再水平放入洞内，一旦折叠起来有偏斜的话,要及时上调吊轮加以调整，不过调整好了之后一定要用小内六角锁加以稳定,这样可以避免在日常使用中吊轮螺帽掉下来。

When installing the iron gate of this villa, first put the hanging wheel or more than four fasteners into the guide rail. Fix the frame and guide rail firmly with screws, and then put them into the hole horizontally. Once folded up and skewed, the lifting wheel should be adjusted in time. However, after adjustment, it must be stabilized with a small hexagonal lock, so as to prevent the lifting wheel screw cap from falling down in daily use.

吊趟门

Hanging sliding door

它的安装方法和大折叠门类似，要先将吊轮或四扇以上使用的固定器放入导轨里，然后将固定器放在导轨的正中间,再将边框和导轨用螺丝进行固定，水平装进洞并安装好门扇即可。如果是两扇出现重叠且有偏斜的时候,可及时调整上方的吊轮进行上下调整。

Its installation method is similar to that of a large folding door. First, put the lifting wheel or four or more retainers into the guide rail, then put the retainers in the middle of the guide rail, and then fix the frame and guide rail with screws. Install the door horizontally into the hole and install the door leaf. If there is overlap and deflection between the two leaves, the upper lifting wheel can be adjusted up and down in time.

以上就是不同类型的别墅铁艺大门安装方法，你们学会了吗？对此还有不懂的地方或者有需求，就来我们网站http://www.jnghbxg.com进行咨询吧！

The above are the installation methods of different types of iron gates in villas. Have you learned? If you still don't understand this or have a need, please come to our website http://www.jnghbxg.com Consult!