济南轻型钢结构是由钢板、热轧型钢和冷加工成型的薄壁型钢制造而成，在厂房、机场或者火车站的设计施工中钢结构已经是较为主流的选择之一。钢结构工程施工时间短并且外形装饰效果佳，今天小编就为大家简单的介绍一下济南轻型钢结构工程的优缺点以及施工的流程及注意事项

Jinan light steel structure is made of steel plate, hot-rolled section steel and cold-formed thin-walled section steel. Steel structure has been one of the more mainstream choices in the design and construction of plant, airport or railway station. The construction time of steel structure engineering is short and the appearance decoration effect is good. Today, Xiaobian will briefly introduce the advantages and disadvantages of Jinan steel structure engineering, as well as the construction process and precautions

1、钢结构施工前应组织监理人员、施工单位技术人员对设计图纸和有关技术标准进行会审。

1. Before the construction of steel structure, the supervisor and the technical personnel of the construction unit shall be organized to jointly review the design drawings and relevant technical standards.

 

2、钢结构构件进场验收，确保其质量符合设计要求。

2. Steel structure members shall be accepted on site to ensure that their quality meets the design requirements.

 

3、根据设计要求对地基进行预埋地脚螺栓连接、混凝土浇筑。

3. The foundation shall be connected with embedded anchor bolts and poured with concrete according to the design requirements.

 

4、现场吊装，遵循先柱后梁，先下后上，从中间到两边的吊装原则。

4. On site hoisting shall follow the principle of column before beam, down before up, and from the middle to both sides.

 

5、对吊装结构进行校正，用吊线锤对钢柱进行校正，用垫板对出现歪斜的钢柱进行校正;用水平仪对钢梁进行校正，然后用千斤顶和倒链进行校正。

5. Correct the hoisting structure, use the plumb bob to correct the steel column, and use the base plate to correct the skewed steel column; Calibrate the steel beam with a level gauge, and then calibrate with a jack and chain fall.

 

6、施工，操作者必须戴帽，系好绳，同时需要指挥员指挥吊装。

6. For construction safety, the operator must wear safety helmet and fasten safety rope. At the same time, the safety commander is required to command the hoisting.