销售咨询热线
15953126901
18615254757
常见问题 question
企业案例 case

联系我们

  • 联系人:济南燕翔铁艺制品有限公司
  • 手机:15953126901
  • 电话:18615254757
  • 邮箱:785385551@qq.com
  • 地址:济南市天桥区历山北路黄台不锈钢市场3区317
当前位置: 首页 > 新闻资讯>常见问题铁艺门的保养要注意什么?

铁艺门的保养要注意什么?

来源:http://www.jnghbxg.com 日期:2021-12-21 发布人: 浏览次数:12
1.避免磕碰。
1. Avoid collision.
这是购得铁艺门后要注意到的一点,铁艺门在搬运过程中应小心轻放;放置铁艺门的地方应是硬物不常碰到的地方;地方一经选定,就不应频繁变动;安装铁艺门的墙面还应保持平整,使铁艺门安装安稳、平实,若摇晃不稳,日久会使铁艺门产生轻微变形,影响铁艺门的使用寿命。
This is the first thing to pay attention to after purchasing the iron door. The iron door should be handled with care in the process of handling; The place where the iron door is placed should be a place where hard objects do not often touch; Once a place is selected, it should not change frequently; The wall on which the iron door is installed shall also be kept flat to ensure that the installation of the iron door is stable and flat. If it is unstable, the iron door will be slightly deformed over time and affect the service life of the iron door.
2.洁净除尘。
2. Clean dust removal.
对于爱干净的朋友来说,更好选用纯棉针织品为抹布,擦拭铁艺门的表面。对于铁艺门上的凹陷处和浮雕纹饰中的灰尘,则更好用细软羊毛刷来除尘。
For clean friends, it's best to use pure cotton knitwear as rag to wipe the surface of iron door. For the dust in the depression and relief decoration on the iron door, it is best to use a fine soft wool brush to remove the dust.
3.远离酸碱。
3. Keep away from acid and alkali.
对铁艺门有腐蚀作用的酸碱是铁艺门的"头号杀手"。铁艺门上若不慎沾上酸(如硫酸、食醋)、碱(如甲碱、肥皂水、苏打水),应立即用清水把污处冲净,再用干棉布擦干。
济南铁艺大门
The acid-base that corrodes the iron gate is the "number one killer" of the iron gate. If acid (such as sulfuric acid and vinegar) and alkali (such as methylalkali, soapy water and soda water) are accidentally stained on the iron door, clean the dirty place with clean water immediately and wipe it dry with dry cotton cloth.
4.隔绝潮湿。
4. Isolate from moisture.
铁艺门应安装在比较通风的地方,潮湿会使金属出现锈蚀,镀铬产生脱膜等。
The iron door shall be installed in a relatively ventilated place. Moisture will cause metal corrosion, chromium plating and film removal.
5.消除锈迹。
5. Remove rust.
如果铁艺门生了锈,不要自作主张用砂纸打磨。锈迹较小较浅的,可用棉纱蘸机油涂于锈处,稍候片刻,用布揩擦便可消除锈迹。若锈迹已经扩大变重,则应请有关技术人员来维修。
If the iron craftsman is rusty, don't polish it with sandpaper. If the rust is small and shallow, cotton yarn can be dipped in engine oil and applied to the rust. After a while, wipe it with a cloth to eliminate the rust. If the rust has expanded and become heavier, please ask relevant technicians to repair it.
我们一直在坚持分享的路上济南铁艺大门http://www.jnghbxg.com真正为您解决您所需要的问题.
We have been sticking to the road of sharing Jinan iron gate http://www.jnghbxg.com Truly solve the problems you need