安装流程

Installation process

1. 基础施工

1. Foundation construction

根据大门的尺寸和重量，在门洞两侧浇筑混凝土基础。基础深度一般为 60 - 80 厘米，宽度比大门边框宽 10 - 20 厘米。在浇筑过程中，将预埋件（通常为钢板或角铁）按照设计要求固定在基础中，预埋件的位置和水平度必须精确，误差不超过 5 毫米，为后续大门的安装提供稳定支撑。

According to the size and weight of the gate, pour concrete foundations on both sides of the doorway. The basic depth is generally 60-80 centimeters, and the width is 10-20 centimeters wider than the door frame. During the pouring process, the embedded parts (usually steel plates or angle irons) are fixed in the foundation according to the design requirements. The position and levelness of the embedded parts must be precise, with an error of no more than 5 millimeters, providing stable support for the subsequent installation of the gate.

2. 大门安装

2. Gate installation

待基础混凝土达到一定强度（一般需养护 7 - 10 天）后，开始安装铁艺大门。将大门抬至门洞处，通过调整垫片，使大门保持垂直和平整，利用水平仪进行检测，确保垂直度误差不超过 3 毫米。然后，使用电焊机将大门边框与预埋件牢固焊接，焊接点应均匀、饱满，焊缝高度不低于 5 毫米。焊接完成后，对焊接部位进行打磨处理，使其表面光滑平整。

After the foundation concrete reaches a certain strength (usually requiring 7-10 days of curing), the installation of the wrought iron gate can begin. Lift the gate to the doorway and adjust the gasket to keep it vertical and flat. Use a level to check and ensure that the verticality error does not exceed 3 millimeters. Then, use an electric welding machine to firmly weld the door frame to the embedded parts. The welding points should be uniform and full, and the weld height should not be less than 5 millimeters. After welding, polish the welding area to make its surface smooth and flat.

3. 配件安装

3. Accessory installation

安装合页时，要确保合页的轴心线垂直，合页间距一般为 30 - 50 厘米。使用配套的螺丝将合页固定在大门边框和墙体上，螺丝要拧紧，防止松动。安装门锁时，选择质量可靠的产品，根据门锁的类型和安装要求进行操作，确保门锁开关灵活，锁芯安全可靠。此外，还需安装门吸或地锁，防止大门在开启或关闭时晃动。

When installing hinges, ensure that the axis of the hinges is perpendicular, and the hinge spacing is generally 30-50 centimeters. Use matching screws to secure the hinges to the door frame and wall, and tighten the screws to prevent loosening. When installing a door lock, choose a reliable product and operate it according to the type and installation requirements of the door lock to ensure that the door lock switch is flexible and the lock cylinder is safe and reliable. In addition, it is necessary to install a door stopper or floor lock to prevent the door from shaking when opened or closed.

调试与验收

Debugging and acceptance

1. 调试

1. Debugging

安装完成后，对铁艺大门进行全面调试。反复开关大门，检查其运行是否顺畅，有无卡顿、异响等现象。调整合页和门锁的位置，确保大门关闭后紧密贴合，无缝隙。同时，检查门吸和地锁的工作状态，保证大门在固定位置稳定可靠。

After installation, conduct comprehensive debugging of the wrought iron gate. Repeatedly open and close the door, check whether it runs smoothly, and whether there are any lagging, abnormal noises, or other phenomena. Adjust the position of hinges and door locks to ensure a tight fit without gaps after the door is closed. At the same time, check the working status of the door latch and floor lock to ensure that the door is stable and reliable in its fixed position.

2. 验收

2. Acceptance

邀请业主对安装工程进行验收。验收内容包括大门的外观、安装质量、使用性能等方面。检查大门表面是否有划痕、掉漆等缺陷，焊接部位是否牢固，配件是否齐全。此外，测试大门的防盗性能，确保其能有效保障场所安全。若发现问题，及时进行整改，直至业主满意。

Invite the owner to inspect and accept the installation project. The acceptance content includes the appearance, installation quality, and performance of the gate. Check whether there are scratches, paint peeling and other defects on the surface of the gate, whether the welding parts are firm, and whether the accessories are complete. In addition, test the anti-theft performance of the gate to ensure that it can effectively guarantee the safety of the venue. If any problems are found, they should be rectified in a timely manner until the owner is satisfied.

本文由济南铁艺大门友情奉献.更多有关的知识请点击:http://www.jnghbxg.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is a friendly contribution from Jinan Iron Art Gate For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message