1、避免碰撞，这是买铁艺大门后个注意的，要小心处理；放置的地方应该是坚硬物体不常碰到的地方；一个地方一旦选定，就不要频繁更换；安装的墙面应保持平整，使熟铁门安装稳定、平整。如果摇晃不稳，久而久之，门会轻微变形，影响使用寿命。

1. Avoid collisions, this is something to pay attention to after buying an iron gate, be careful when handling it; The placement should be in a place where hard objects are not frequently touched; Once a place is selected, do not change it frequently; The installed wall should be kept flat to ensure stable and even installation of the wrought iron door. If the shaking is unstable, over time, the door will deform slightly, affecting its service life.

2、清洁除尘，对于干净的朋友，用纯棉针织品作为抹布擦拭门表面。对于门上的凹陷和压花图案中的灰尘，使用柔软的羊毛刷来灰尘。

2. Clean and remove dust. For clean friends, use pure cotton knitted fabric as a cloth to wipe the surface of the door. Use a soft wool brush to remove dust from the indentations and embossed patterns on the door.

3、远离酸和碱，对铁艺大门有腐蚀作用，酸碱是铁门的头号天敌。如果铁门不慎沾上污渍，应立即用清水冲洗干净，然后用干棉布擦干。

3. Stay away from acid and alkali, which have a corrosive effect on iron gates. Acid and alkali are the number one enemies of iron gates. If the iron door accidentally gets stained, it should be immediately rinsed with clean water and then wiped dry with a dry cotton cloth.

4、隔绝湿气，应安装在通风的地方。湿度会导致金属过早腐蚀，镀铬会造成剥离，影响门的使用。  5、除锈，如果铁艺大门生锈了，不要主动用砂纸打磨。如果铁锈小而浅，将棉纱浸在机油中，涂在铁锈上。过一会儿，用布擦拭，锈迹。如果铁锈变得更大更重，应请相关技术人员进行修理。

4. To isolate moisture, it should be installed in a well ventilated area. Humidity can cause premature corrosion of metals, and chrome plating can cause peeling, affecting the use of doors. 5. Rust removal, if the iron gate is rusted, do not actively use sandpaper to polish it. If the rust is small and shallow, soak the cotton yarn in engine oil and apply it to the rust. After a while, wipe with a cloth to eliminate rust. If the rust becomes bigger and heavier, relevant technicians should be consulted for repair.