钢结构材料是一种绿色环保的材料，现在很多人在搭建厂房、隔层或者搭建楼梯的时候都会选择钢结构材料，那么大家知道复式楼房钢结构隔层的制作方法以及注意事项吗?下面济南轻型钢结构厂家为您解说。

Steel structure material is a kind of green and environment-friendly material. Now many people choose steel structure material when building plants, partitions or stairs. Do you know the manufacturing method and precautions of steel structure partitions in duplex buildings? Next, Jinan light steel structure manufacturer will explain.

1、在承重墙上打几对洞，要求穿进钢管或刚梁。以它们作跃层的承重件，其他部分就好办了;缺点是承重墙的洞，能打不能打，可能会受别人的限制。

1. Several pairs of holes shall be drilled on the bearing wall, which shall be threaded into steel pipes or rigid beams. They can be used as load-bearing parts of the thermocline, and other parts can be easily handled; The disadvantage is that the holes in the load-bearing wall can be opened or not, which may be limited by others.

2、在下层重新建立一些承重柱，在这些柱上建跃层;这个作法避免了1的缺点，但也有缺点：浇注工程复杂麻烦，预构件则要整尺寸的，搬运进屋是个困难，而且底层也有面积上的额外损失。如果1的缺点无法克服，那么就只能这样。

2. Re establish some bearing columns in the lower layer, and build thermocline on these columns; This method avoids the disadvantages of No. 1, but it also has disadvantages: the pouring project is complex and troublesome, the prefabricated members need to be full sized, it is difficult to carry them into the house, and the ground floor also has additional loss in area. If the shortcomings of 1 cannot be overcome, this is the only way.

隔层

interlayer

3、一般情况下，用槽钢就行了，但用工字钢的抗弯强度会更高，当然造价也会更高，钢木结构搭建的优点是速度快，即搭即用，不需要等待。缺点是槽钢做的阁楼当人在上面走动时，会有一定的晃动声，槽钢规格越小，晃动声越大。

3. In general, it is OK to use channel steel, but the bending strength of I-steel will be higher, of course, the cost will also be higher. The advantage of steel wood structure construction is that it is fast, ready to use, without waiting. The disadvantage is that when people walk on the loft made of channel steel, there will be a certain shaking noise. The smaller the specification of channel steel, the greater the shaking noise.

采用槽钢的做法属于推荐做法。根据我们多年的施工经验，总结出了有关钢木结构的工艺及做法，配合实景照片，现上传供大家参考，希望对挑高层的业主有所帮助。挑高房高度2300MM左右的位置一般都会有一道圈梁，这是专为做钢结构预留的，做钢结构时，主钢一定插入此梁体中。

Channel steel is recommended. Based on our years of construction experience, we have summarized the technology and practice of steel and wood structures. With the help of live photos, we are uploading them for your reference, hoping to be helpful to the owners of high-rise buildings. Generally, there is a ring beam at the height of 2300mm or so of the cantilevered room, which is reserved for steel structure. When making steel structure, the main steel must be inserted into this beam.

4、现在做隔层我们一般使用10号工字钢，10号的钢我们一般称之为主钢，主钢与主钢之间(靠墙体部分)需用8号槽钢联接加固。

4. Now we generally use No. 10 I-steel for the partition. No. 10 steel is generally called the main steel, and between the main steel and the main steel (the part near the wall), 8 # channel steel is required for connection and reinforcement.

此外面积小的房子，我们一定要注意层高，一般的小复式房，它的层高应该在5米以上，如果房子的层高小于5米，分成上下两层之后，会让人感觉空间非常的狭窄压抑。

In addition, for a small house, we must pay attention to the floor height. For a general small duplex house, its floor height should be more than 5 meters. If the floor height of the house is less than 5 meters, and it is divided into upper and lower floors, people will feel that the space is very narrow and oppressive.

在复式房子中，楼梯是不可缺少的。尽量在楼梯的两侧安装扶手，这样可以保证楼梯的性能和稳定性，以免家中有老人和孩子上下楼梯时发生意外。

In a duplex house, stairs are indispensable. Try to install handrails on both sides of the stairs to ensure the performance and stability of the stairs, so as to avoid accidents when old people and children go up and down the stairs at home.

上述内容是厂家为大家介绍的钢结构隔层的注意事项，相信大家看完之后会对此有进一步的认识和了解，如若您想要了解更多的内容，可以多多关注我们的网站http://www.jnghbxg.com。

The above contents are the precautions for steel structure interlayer introduced by the manufacturer. I believe you will have a further understanding and understanding after reading it. If you want to know more, you can pay more attention to our website http://www.jnghbxg.com 。