1、避免磕碰这是购得铁艺门后最先要注意到的一点，铁艺门在搬运过程中应小心轻放，放置铁艺门的地方应是硬物不常碰到的地方，地方一经选定，就不应频繁变动，安装铁艺门的墙面还应保持平整，使铁艺门安装安稳、平实，若摇晃不稳，日久会使铁艺门产生轻微变形，影响铁艺门的使用寿命。

1. Avoiding collisions is the first thing to pay attention to after purchasing an wrought iron door. The wrought iron door should be handled with care during transportation, and the place where it is placed should be a place where hard objects do not often come into contact. Once the place is selected, it should not be frequently changed. The wall on which the wrought iron door is installed should also be kept flat to ensure a stable and solid installation. If it is not shaken steadily, it will cause slight deformation over time, affecting the service life of the wrought iron door.

2、远离酸碱对铁艺门有腐蚀作用的酸碱是铁艺门的“头号杀手"，铁艺门上若不慎沾上了，应立即用清水把污处冲净，再用干棉布擦干。

2. Stay away from acid and alkali, which have a corrosive effect on wrought iron doors. Acid and alkali are the "number one killers" of wrought iron doors. If they accidentally come into contact with wrought iron doors, they should be immediately rinsed with clean water and wiped dry with a dry cotton cloth.

3、定期除尘铁艺门是在户外使用的，户外环境经常是尘土飞扬，时间一久，门上就会落上很多灰尘，这些灰尘会影响门的色泽，还会破坏它的保护膜，因此应该定期用柔软的棉布擦拭门上的灰尘。对于铁艺门上的凹陷处和浮雕纹饰中的灰尘，则最好用细软羊毛刷来除尘。

3. Regular dust removal of wrought iron doors is used outdoors, where the environment is often dusty. Over time, a lot of dust will accumulate on the door, affecting its color and damaging its protective film. Therefore, it is recommended to regularly wipe the dust off the door with a soft cotton cloth. It is best to use a fine soft wool brush to remove dust from the depressions and relief patterns on wrought iron doors.

4、隔绝潮湿铁艺门应安装在比较通风的地方，潮湿会使金属过早出现锈蚀，镀铬产生脱膜等，影响门的使用。如逢大雾天气，应用干棉布擦拭铁艺上的水珠。若逢雨天，应于雨停后及时把水珠擦干。

4. Moisture resistant wrought iron doors should be installed in a well ventilated area. Moisture can cause premature rusting of metal, peeling of chrome plating, and affect the use of the door. If encountering heavy fog weather, use a dry cotton cloth to wipe the water droplets on the iron work. If it rains, the water droplets should be wiped dry in a timely manner after the rain stops.

5、消除锈迹如果铁艺大门生了锈，不要自作主张用砂纸打磨。锈迹较小较浅的，可用棉纱蘸机油涂于锈处，稍候片刻，用布揩擦便可消除锈迹。若锈迹已经扩大变重，则应请有关技术人员来维修。

5. Eliminate rust. If the wrought iron gate has rust, do not use sandpaper to polish it on your own. For areas with small and shallow rust stains, cotton yarn dipped in engine oil can be applied to the rust area. After a while, wipe with a cloth to eliminate the rust stains. If the rust has expanded and become heavier, relevant technicians should be invited to repair it.