我们济南铁艺护栏厂家在日常的工作中，经常会在图纸上碰到铁艺护栏的表面防腐处理有喷塑（粉末喷涂）和氟碳喷漆两种工艺，这两种都是铁艺护栏的表面防腐处理，经过了喷塑（粉末喷涂）和氟碳喷漆两种工艺之后，增强了护栏的抗氧化抗紫外线、耐候耐腐能力。

In our daily work, Jinan Iron Guardrail Manufacturers often encounter two processes for surface anti-corrosion treatment of Iron Guardrail on drawings: spray molding (powder spraying) and fluorocarbon spraying. These two processes are used for surface anti-corrosion treatment of Iron Guardrail. After passing through two processes: spray molding (powder spraying) and fluorocarbon spraying, the antioxidant, UV resistant, weather resistant, and corrosion resistant capabilities of the guardrail are enhanced.

那么这两种工艺在优点及造价上具体有那些区别呢？下面就给大家答疑解惑。

So what are the specific differences in advantages and cost between these two processes? Below we will answer your questions and clarify your doubts.

铁艺护栏表面处理有粉末喷涂和氟碳喷涂：

The surface treatment of iron guardrails includes powder spraying and fluorocarbon spraying:

粉末喷涂的原料为：聚氨脂、聚氨树脂、环氧树脂、羟基聚脂树脂以及环氧聚酯树脂，可配制多种颜色。粉末喷涂的特点：喷涂设备有手工的，有自动吊挂式、施工简单、涂层厚度为30微米以上，抗冲击，耐磨擦，防腐蚀，耐候性等均好，涂料价格比氟碳便宜。使忒远护栏颜色品种增加，同时也增强抗腐蚀能力。

The raw materials for powder spraying are: polyurethane, polyurethane resin, epoxy resin, hydroxyl polyester resin, and epoxy polyester resin, which can be prepared in various colors. The characteristics of powder spraying: The spraying equipment is manual, with automatic hanging type, simple construction, coating thickness of over 30 microns, good impact resistance, wear resistance, corrosion resistance, weather resistance, etc. The coating price is cheaper than fluorocarbon. Increase the variety of colors for the Teyuan guardrail, while also enhancing its corrosion resistance.

另一种静电喷涂为液态喷涂，又称氟碳喷涂，属于高档次喷涂价格较高，，越来越受到建筑业及用户的重视和青睐。氟碳喷涂具有优异的抗退色性、抗起霜性、抗大气污染(酸雨等)的腐蚀性，抗紫外线能力强，抗裂性强以及能够承受恶劣天气环境。是一般涂料所不及的。

Another type of electrostatic spraying is liquid spraying, also known as fluorocarbon spraying, which belongs to high-end spraying with higher prices and is increasingly valued and favored by the construction industry and users. Fluorocarbon spraying has excellent color fading resistance, frost resistance, corrosion resistance to atmospheric pollution (acid rain, etc.), strong UV resistance, strong crack resistance, and ability to withstand harsh weather environments. It is beyond the reach of ordinary coatings.

铁艺护栏粉沫喷涂加工和氟碳喷涂加工从外表上看的确很类似，但也有许多不同之处简略地总结起来，有下面几点：

Iron guardrail powder spray processing and fluorocarbon spray processing are indeed similar in appearance, but there are also many differences that can be briefly summarized as follows:

1、功用方面：氟碳喷涂比粉末喷涂功用上要优越许多，耐磨、耐气候，抗紫外线，不易褪色。室外多用氟碳喷涂，室内多用粉末喷涂。

1. In terms of function: Fluorocarbon spraying is much superior to powder spraying in terms of wear resistance, weather resistance, UV resistance, and not easy to fade. Fluorocarbon spraying is commonly used outdoors, while powder spraying is commonly used indoors.

2、价格方面：氟碳喷涂比粉末喷涂价格要高出几倍的价格。

2. In terms of price: Fluorocarbon spraying is several times more expensive than powder spraying.

3、操作不同氟碳喷：氟碳喷是液态喷涂的方式将涂料喷涂到工件的表面。喷塑：喷塑是将塑料粉末通过高压静电设备充电，在电场的作用下将涂料喷涂到工件的表面。

3. Different operations of fluorocarbon spraying: fluorocarbon spraying is a liquid spraying method that sprays paint onto the surface of the workpiece. Spray molding: Spray molding is the process of charging plastic powder through a high-voltage electrostatic device and spraying paint onto the surface of the workpiece under the action of an electric field.

4、涂料不同氟碳喷：氟碳喷的涂料是聚偏二氟乙烯树脂为基料或配金属铝粉为色料。喷塑：喷塑的涂料是聚氨脂、聚氨树脂、环氧树脂、羟基聚脂树脂以及环氧聚酯树脂。

4. Different coating fluorocarbon spraying: the coating of fluorocarbon spraying is Polyvinylidene fluoride resin as the base material or aluminum powder as the color material. Spray molding: The coatings used for spray molding are polyurethane, polyurethane resin, epoxy resin, hydroxyl polyester resin, and epoxy polyester resin.

对于一般工厂、小区、市政道路护栏、阳台栏杆等根据成本造价一般都选用粉末喷涂，因为氟碳喷涂的造价确实是太贵了，我们工厂日常生产的铁艺护栏可粉末喷涂可氟碳喷涂，根据图纸要求和成本核算来确定。更多相关事项就来我们网站http://www.jnghbxg.com咨询！

For general factories, residential areas, municipal road guardrails, balcony guardrails, etc., powder spraying is generally used based on the cost cost, because the cost of fluorocarbon spraying is indeed too expensive. Our factory's daily production of iron guardrails can be powder sprayed or fluorocarbon sprayed, determined according to the requirements of the drawings and cost accounting. For more related matters, come to our website http://www.jnghbxg.com consulting service