如今很多自建房或是别墅都会安装一扇铁艺大门，但铁门用久了就会出现各种问题。那么门口的济南铁艺大门下垂了怎么解决？和小编一起来看看吧。

Nowadays, many self built houses or villas will be equipped with an iron gate, but the iron gate will have various problems after being used for a long time. How to solve the problem that the iron gate of Jinan at the gate is drooping? Let's have a look with Xiao Bian.

先打开门露出内部的铰链，之后使用螺丝刀拧紧螺钉。如果是情况比较严重的，须要更换新的螺钉。先使用钻头把孔钻所需的长度，之后再拆除原有的螺钉，并且从新安装上新的螺钉进行固定。把牙签或是碎片放入孔中，只用胶水进行填满螺孔，把螺丝推在原来的地方，同时清洁表面多余的木胶然后进行测试即可。

First open the door to expose the inner hinge, then use a screwdriver to tighten the screws. If the situation is serious, replace the screws with new ones. Use a drill to drill the hole to the required length, then remove the original screws, and install new screws for fixation. Put toothpicks or fragments into the hole, fill the screw hole with glue only, push the screw in the original place, clean the excess wood glue on the surface and then test.

当我们在定制或是挑选铁艺大门时，须要注意它的运输，还要注意铁制品表面喷漆或是涂层的原有可见性，否则铁制品的表面很容易出现生锈，这样才能减少铁门的使用寿命和美观性。

When we customize or select the iron gate, we must pay attention to its transportation, and also pay attention to the original visibility of the painting or coating on the iron product surface, otherwise the iron product surface is easy to rust, so as to reduce the service life and aesthetics of the iron gate.

在安装铁艺大门时，要选择比较合理的地方进行安装。比方说不能选择周边有许多硬物的地方，还要确保墙面的平整度，这样安装后的铁艺门就会非常的稳固而牢固，还不会出现轻微的晃动，这样就能确保门不会出现晃动和变形等。

When installing the iron gate, a reasonable place shall be selected for installation. For example, you can't choose a place with many hard objects around, but also ensure the flatness of the wall, so that the iron doors after installation will be very stable and firm, without slight shaking, so that you can ensure that the doors will not shake and deform.

在我们的日常卫生与门的清洁中，要选择使用一些比较柔软的棉针织物作为抹布使用或是比较柔软的羊毛刷清洁。

In our daily hygiene and door cleaning, we should choose to use some soft cotton knits as rags or soft wool brushes for cleaning.

铁艺门在潮湿的环境中非常容易出现生锈，因此我们尽量要把门安装到通风的地方，这样才能防止门的表保护膜因金属过度腐蚀导致出现脱落。

Iron doors are very easy to rust in a humid environment, so we should try to install the door in a ventilated place to prevent the surface protective film of the door from falling off due to excessive metal corrosion.

以上是门口铁艺大门下垂了怎么解决的相关知识就介绍到这里了，有需要了解更多资讯的朋友，请继续关注我们网站http://www.jnghbxg.com，为您相关信息！

The above is the relevant knowledge about how to solve the problem of the hanging iron gate. If you need more information, please continue to follow our website http://www.jnghbxg.com , recommend relevant information for you!